How to shock your pool
The shock process of a swimming pool is carried out in order to remove various debris. Many products come from a person's body when they enter a pool. They include sweat, dead skin and oils. Of course, there is always a chance that someone has also pee in the pool. Although these thoughts are not pleasant, they are a reality. That's why it's so important to shock to maintain your pool.
You must make sure you are using the correct type of shock absorber for your pool. Some are designed for chlorinated pools and some are not. In addition to this factor, you should also consider the size and type of filtering system you have. If you are unsure of what to get as an authorized pool dealer. They can make sure you have the right product to solve this important problem.
Using the proper amount of shocker for your pool is also very important. This will be determined based on the overall size of your pool. You can cause damage if you do not use enough or use too much. You must also make sure that you are using a shock quality product to do the job properly.
The process of using shock takes time. You will pour it into the water at the bottom of the pool. Then you will use a pool skimmer to help you mix it around your pool. Remember, if your filter or pump does not work as it should, it will be harder for you to get the right results with your shock system.
The shock frequency of your pool will vary. It's a good idea to keep the products on hand to keep them when you need them. The best time of the day to check it is in the morning. You can do this by cleaning your pool. If you smell a strong smell of chlorine, you may have to shock it. Ironically, a strong smell of chlorine indicates that you need more, not that you have too much!
Use test strips to know the level of chlorine in your pool. The test kit will tell you what the reading should be. When your levels are outside the ideal range, you know it's time to shock her. It seems that the more you use your pool more often and more people use it, the more you will have to electrocute if you have to shock it, so be aware of this fact.
Do not try to speed up the process by adding dry product to the pool. Instead, you have to mix the shocker with water in a bucket. Then add it slowly to the pool water. This will ensure that it is as effective as possible. A good mix will also reduce the number of times you will need to do the shock treatment for your pool.
