Tips to help maintain your pool

Tips to help maintain your pool

If you have a pool, then you have all the basics to maintain it. After all, it's an investment you're committed to protecting. You also want to be able to spend a lot of time in the water, which is impossible if you have a problem. Here are some helpful tips you may not know. They can help you accomplish more in less time.

Filters are a necessity for all pools, but they are not without flaws. Even if you get a good mark, you may discover that dirt and debris is being passed through. This has to do with the filtering system and the speed at which water is pushed through. One way to recover more dirt and debris is to add a type of flocculant.

This is a type of chemical that allows small particles of dirt and debris from your pool to pool. This means that when they reach the filter, they are no longer quite. You can also use a vacuum cleaner to vacuum them from the bottom of the pool. This can be beneficial because the filter will be less often clogged.

As they are larger, they will be caught and will not be allowed to return to your pool. As a result, you will find that the overall cleanliness of your pool has improved. This process is very easy and affordable. This will also reduce the amount you will have to spend on shock treatments as they will not be used nearly as often.

In order to reduce the amount of chlorine you need to add to the pool, you need a good quality stabilizer. You will find that it also reduces the flow of your pH level. The most commonly used type of stabilizer is cyanuric acid. When you add new water to your pool, you definitely want to supplement it with a stabilizer.

The amount you will need depends on the amount of water in the pool. To determine if your pool needs more stabilizer, it is necessary to test it from time to time. This is done by evaluating your chlorine levels. Most people do not realize that the sun's UV rays can reduce the effectiveness of your chlorine.

With a stabilizer in place, it will not be lost. You will not need to add chlorine as often as before. This will save you time and money, but you will always have a very well maintained pool. You do not want to add too much stabilizer, as this can have a detrimental effect. You may need to drain all the water and start again. Therefore, you want to make sure to pay close attention to the graphics in order to add only the appropriate amounts.

Do not forget to keep an eye on the metals either. Copper is very common because it is used in swimming pool equipment and in certain chemicals to which you will have access. If you have too much copper, it could stain your pool, so look for signs such as reddish color.

If you have too much iron in the water, you get a greenish tinge. Sometimes even the water you use to fill the pool contains large amounts of copper and iron. Instead of waiting for them to color your pool, you can perform preventative maintenance. The chemicals to be used for this purpose are called chelating agents. You want to use them only as indicated. The quantities to be used depend on the seriousness of the problem posed by the presence of these metals.

Similar articles


Comments (0)

Leave a comment